How to Make a Pickleball Paddle That Performs Like a Pro?
Pickleball is a relatively new sport that is taking the nation by storm. If you’re looking to get into the game, you’re going to need a paddle. But not just any paddle will do – you need a paddle that will help you perform like a pro.
With a little bit of know-how, you can make a pickleball paddle that will help you take your game to the next level. Here’s what you need to know:
Materials
The first step is to gather the materials you’ll need to make your paddle. For the paddle itself, you’ll need:
- One sheet of plywood
- One piece of 1/2-inch PVC pipe
- One piece of 1-inch PVC pipe
- One can of spray paint
- One can of clear sealant
For the handle, you’ll need:
- One piece of 1/2-inch PVC pipe
- One piece of 3/4-inch PVC pipe
- Two pieces of 1-inch PVC pipe
- One can of spray paint
- One can of clear sealant
Tools
Next, you’ll need to gather the tools you’ll need to put your paddle together. You’ll need:
- A saw
- A drill
- A drill bit
- A hammer
- Nails
- A screwdriver
- A Phillips head screwdriver bit
Instructions
1. Start by cutting your plywood sheet into two pieces. One piece should be 24 inches wide by 18 inches long. This will be the main body of your paddle. The other piece should be 18 inches wide by 12 inches long. This will be the face of your paddle.
2. Cut your 1-inch PVC pipe into two pieces. Each piece should be 12 inches long.
3. Cut your 1/2-inch PVC pipe into two pieces. Each piece should be 12 inches long.
4. Take your 1-inch PVC pieces and attach them to the top and bottom of the larger plywood piece using the nails and the hammer. Make sure that the pipes are flush with the edges of the plywood.
5. Take your 1/2-inch PVC pieces and attach them to the top and bottom of the smaller plywood piece using the nails and the hammer. Make sure that the pipes are flush with the edges of the plywood.
6. Drill four holes into the smaller plywood piece. These holes should be evenly spaced and should be big enough to fit the nails through.
7. Take the smaller plywood piece and attach it to the larger plywood piece using the nails. Make sure that the holes you drilled are lined up with the holes in the larger plywood piece.
8. Cut your 3/4-inch PVC pipe into two pieces. Each piece should be 12 inches long.
9. Cut your 1/2-inch PVC pipe into two pieces. Each piece should be 12 inches long.
10. Take your 3/4-inch PVC pieces and attach them to the top and bottom of the larger plywood piece using the screws and the screwdriver. Make sure that the pipes are flush with the edges of the plywood.
11. Take your 1/2-inch PVC pieces and attach them to the top and bottom of the smaller plywood piece using the screws and the screwdriver. Make sure that the pipes are flush with the edges of the plywood.
12. Spray paint the entire paddle with the color of your choice. Let the paint dry completely.
13. Once the paint is dry, apply a layer of clear sealant to the entire paddle. This will help to protect the paint and keep it from chipping.
14. Attach the handle to the paddle using the screws and the screwdriver. Make sure that the handle is securely attached before using your paddle.
15. Enjoy your new pickleball paddle!